Note:This page may contain affiliate links.

VIZIO Sound Bar Keeps Turning Off

VIZIO Sound Bar Keeps Turning Off: Problem Resolved [2022]

You may have wondered why your VIZIO Sound Bar keeps turning Off off automatically?

You are not alone because this article addresses your issues. When you transmit sound from any device to your Vizio’s Soundbar, you will always want to listen to it uninterrupted.

However, like most forthcoming products, the soundbar may fail to reply because it shuts itself off.

I understand how humiliating this scenario might be, but the good news is that you can resolve it without too many complications. Read on to learn why the problem occurs and how to fix it.

Why Does VIZIO Sound Bar Keeps Turning Off Automatically?

vizio soundbar
Dev Thakkar/ Swing Vertigo

Your sound may be cut off automatically for a variety of reasons. Check out some of them here.

  • Stay informed and safe!
  • The firmware is no longer current.
  • You are not using a Vizio remote control.
  • The eco settings can be toggled on and off.

Users can stream sound or music from Bluetooth-enabled tablets, smartphones, and PCs to the Vizio soundbar.

It would be best if you stayed within the soundbar’s range after pairing the source device.


Also Read: Love Soundbar Comparison? Here’s the epic standoff between Sonos and Bose Soundbars [2022]


To avoid harming your ears, always turn down the volume settings on your source device and soundbar before pushing the play button.

Here’s what one Reddit user had to say about it

“I have the same problem with my VIZIO SB3651-E6 soundbar. It appears that after an hour or two of viewing TV with no changes to the volume level, it simply shuts down. This model includes a remote, and I ensured that the ECO mode was turned off on mine. It still happens after long periods of viewing. I hadn’t checked to see whether there was a firmware upgrade available. I guess I’ll have to give it a shot as well.”

Want to dig in further? Here's the full reddit thread!

How Do I Prevent My Vizio Sound Bar from Turning Off on Its Own?

vizio soundbar
Dev Thakkar/ Swing Vertigo

The automated shutting off of Vizio’s Soundbar might be highly inconvenient.

However, there are various ways to prevent the soundbar from turning off automatically. Some of them are listed below.

Method 1: Reset Your Vizio Soundbar

Several common issues can be resolved by resetting the soundbar. It does, however, remove every detail in the soundbar, including Bluetooth pairings. As a result, you will need to factory reset it.

Follow these steps to reset your soundbar:

  • Press the menu button on your remote control.
  • Navigate to factory Reset No. using the up and down arrows.
  • Click the next button to select “Reset Yes,” then press the Play button.
  • Verification If “yes” is displayed, click the play button to allow the resetting to proceed.

The factory reset is complete when the LED lights on the soundbar display flash three times.


Also Read: Soundbars are fine, but how to set up the entire home theater system? Here’s how.


Using the Bluetooth and volume down buttons, reset the device.

You may also use your Bluetooth and the volume buttons to reset the soundbar. To do so correctly, take the following steps:

  • Navigate to the menu on your Vizio soundbar, then locate the volume down button.
  • On the control panel, look for the Bluetooth button.
  • Press and hold the two buttons simultaneously for around 5 seconds.

To indicate that the factory reset is complete, the LED lights on the soundbar display will flash three times.

Here's the Vizio Sound Manual PDF For User Model SB36512-F6.

Method 2: Reset the Environmental Settings

Environmental Settings In Vizio Soundbar
Credit: Reddit

When the eco audio setting is turned on or off, the soundbar will power off automatically if no audio cable signal is detected. So, if you don’t want it to turn off, you can turn it off.

To access the eco power button options, use your remote to hit the next or previous. Then, disable the eco settings.

Method 3: Download and Install a Firmware Update

Firmware Update
Firmware Update

As long as the Vizio’s Soundbar is connected to the Internet via the Smart Cast mobile app, any new updates are instantly downloaded.


Also Read: Want To Sing Songs But Can’t Decide Which One To Choose? We have over 50+ choices just for you!


So, first, download the app on your mobile device and then follow these instructions to connect the soundbar to single/dual-band Wi-Fi.

  • Step 1: On your remote, press the Menu button. Using the arrow keys, navigate to the Wi-Fi setup and then choose it using the play/pause button.
  • Step 2: Press the Pause/Play button again to confirm your selection. The front LEDs will turn on and off.
  • Step 3: Scroll down the app and select “Device Settings.”
  • Step 4: Select “Add a new device,” then follow the on-screen directions to complete the configuration.

When you’ve finished connecting the app’s network to the soundbar, follow these steps to update the firmware Vizio.

  • Navigate to the settings menu of your mobile app.
  • Go to “system,” then “check for updates.”
  • If the soundbar requires a firmware update, it will turn off and download and install the update.
  • Wait about 30 minutes for the installation to finish. The mobile app and the soundbar’s connection will be lost when the latest firmware is installed on the soundbar.
  • It will, however, be restored after the installation is completed. As a result, you will not be concerned if the connection is lost. During the update procedure, do not disconnect the soundbar from the power cord cable supply.

Method 4: Change The Remote

vizio soundbar
Dev Thakkar/ Swing Vertigo

It might also be possible that you’re using a universal remote or another device that isn’t a real soundbar remote? If this is the case, the soundbar will shut down automatically.

While the universal remote may function well, not all its functionalities may be. As a result, Vizio always suggests using an original remote. As a result, to resolve these issues, make sure you use a genuine remote of the soundbar.

Why Does My Vizio Soundbar Continue To Turn Off Even After I Reset It?

Vizio Still Turning Off
Vizio Still Turning Off

If you tried any or all of the procedures indicated above, your soundbar should stop turning off automatically. If it does not react, you will need to contact Vizio support service for assistance.

They may help you understand why the problem occurs because they are the creators. If necessary, they may suggest a hardware repair. If necessary, you may need to explain the nature of the problem you are experiencing in detail; they will fix it.

You can prevent your soundbar from turning off automatically by resetting it. You must also confirm that the firmware is up-to-date. Connecting it to the Internet using the Vizio Smart Cast app on your phone instantly downloads the updates.

FAQs About The VIZIO Sound Bar

Vizio Soundbar Troubleshoot FAQs
Vizio Soundbar Troubleshoot FAQs

Do Vizio soundbars require an update?

Vizio Update

Ans: The truth is that your Vizio Soundbar may require updates in the future. They release firmware and software updates regularly, and these updates assist in improving your soundbar’s performance and compatibility and may resolve current issues.
If you do not receive these updates, your soundbar may cease to function abruptly.

How do I keep my Vizio Soundbar up-to-date?

Keeping Vizio Up To Date

Ans: When a new firmware version is ready, your Vizio’s Soundbar will download it for you automatically. However, your device must be linked to the Internet via the Vizio Smart Cast mobile app.

The Vizio Smart Cast Mobile App updates the Vizio Sound Bar.
To update the firmware to the most recent version, follow the procedures below:

• Navigate to “Settings > System > Check for Updates” in the Vizio Smart Cast mobile app.

• Click “Yes” to confirm that you want to check for updates.

• When an update is available, the soundbar will be turned off. It will automatically download and install the new firmware.

• The update procedure can take up to 30 minutes to complete. Keep in mind that while the update is being deployed, the connection between the Smart Cast app and the soundbar will be lost.

• When finished, the power LED will remain illuminated, and the Smart Cast app connection will be restored.

During the upgrade process, do not manually turn on your soundbar. If the update is interrupted, you must restart the procedure from the beginning.

3. What’s the Deal with My Vizio Sound Bar Popping?

Ans: Popping noises on your Vizio TV might be annoying in the middle of a movie. Still, they could also be the first indicator of a problem that has to be addressed by a registered Vizio repair shop. The popping noises could be caused by your power outlet button supply, speakers, or INPUT Button.

How do I link my Vizio soundbar to the Internet?

Internet

Ans: To connect your Vizio bar to Wi-Fi, follow these steps:
• Use the Vizio Smart Cast Mobile App to connect your Vizio’s Sound Bar to the Wi-Fi router.

• From the iOS App Store or the Google Play Store, download the Vizio Smart Cast mobile app for your phone or tablet.

• Next, activate Wi-Fi Setup Mode on your soundbar by pressing the Menu button on the Sound Bar Remote. Locate the Wi-Fi Setup option by using the arrow keys.

• Next, press the play/pause button to select Wi-Fi Setup.

• Confirm your selection by pressing the Play/Pause button again.

• When in pairing mode, the front LEDs of the soundbar will begin to cycle as an indication.

• On the Vizio Smart Cast app’s home screen, scroll down and tap “Devices Settings.”

• Select “Add New Device” and follow the on-screen setup instructions.

Your soundbar is now Internet-connected.

How Can I Reset My Vizio Sound Bar?

Ans: Hold down the “Inputs” and “Bluetooth” buttons for 5 to 6 seconds. The restart of your Vizio soundbar will take place. If that doesn’t work, move on to the next step.

Hold down the “Inputs” and “Volume Down” keys for another 5 to 6 seconds. Your Vizio’s Soundbar should reboot now. If it doesn’t restart, proceed to the next step.
For 5 to 6 seconds, press and hold the “Inputs” and “Volume Up” buttons. If the first two procedures did not work for your soundbar, try this one.

What are the Vizio sound bar codes?

Vizio Soundbar Codes

Ans: The codes for the Vizio’s Sound Bar 5 Digit Remote Control are 31517324543197511144. Some soundbars can be programmed to receive additional IR signals to be controlled.

Incorporate the TV volume IR into the SB. All codes were claimed to be compatible with the Soundbar VSB200, SB3820, VSB201, VHT215, and S3821.

If you’ve been agitated and wondering, “Why does my VIZIO Sound Bar Keeps Turning Off on its own?” I’m sure this piece has been beneficial to you. Do leave a comment if it is helpful to you!

Leave a Reply

Your email address will not be published.

Scroll to Top