Does your VIZIO Sound Bar keeps turning off automatically?
Don’t worry, you are not alone here (Source: Reddit). When you transmit sound from any device to your Vizio’s Soundbar, you will always want to listen to it uninterrupted.
However, the soundbar may fail to reply because it shuts itself off.
I understand how frustrating this scenario might be, but the good news is that you can resolve it without breaking your head 🙂. Let’s dive deep into facts and solutions:
- 🤔 Why Does VIZIO Sound Bar Keeps Turning Off Automatically?
- 👥 Here’s what one Reddit user had to say about it:
- 🙄How Do I Prevent My Vizio Sound Bar from Turning Off on Its Own?
- 😉Method 1: Reset Your Vizio Soundbar
- ♻️ Method 2: Reset the Environmental Settings
- 🔥Method 3: Download and Install a Firmware Update
- 🤭Method 4: Change The Remote
- 🤝 Method 5: Replace the VIZIO subwoofer with your VIZIO Soundbar
- ⚡Method 6: Plugging into Right Audio Out Port Behind The TV
- 🧿Method 7: Double-check that the Sound Bar is set to the correct input.
- 😶Why Does My Vizio Soundbar Continue To Turn Off Even After I Reset It?
- 🤓FAQs About The VIZIO Sound Bar
🤔 Why Does VIZIO Sound Bar Keeps Turning Off Automatically?
Your sound may be cut off automatically for a variety of reasons. Check out some of them here.
Users can stream sound or music from Bluetooth-enabled tablets, smartphones, and PCs to the Vizio soundbar.
It would be best if you stayed within the soundbar’s range after pairing the source device.
To avoid harming your ears, always turn down the volume settings on your source device and soundbar before pushing the play button.
👥 Here’s what one Reddit user had to say about it:
“I have the same problem with my VIZIO SB3651-E6 soundbar. It appears that after an hour or two of viewing TV with no changes to the volume level, it simply shuts down. This model includes a remote, and I ensured that the ECO mode was turned off on mine. It still happens after long periods of viewing. I hadn’t checked to see whether there was a firmware upgrade available. I guess I’ll have to give it a shot as well.”
Want to dig in further? Here's the full reddit thread!
🙄How Do I Prevent My Vizio Sound Bar from Turning Off on Its Own?
First things first: The reason behind the automated shutting off of Vizio’s Soundbar can be a bit complicated.
However, this guide has come to your rescue! Refer to this table and follow the detailed steps that follow:
|Solutions||Factory Reset||Eco-setting turning off||Installing firmware||Using new remote||Replacing vizio subwoofer||Plugging into right audio out port||Inserting into the right input port.|
|Time needed||5 minutes||2 minutes||Upto 30 minutes||Depends on availability.||Depends on availability.||5 minutes||5 minutes|
|Prior Knowledge.||Ability to follow steps||Able to navigate to eco-settings||Prior knowledge of installing firmware will be a plus point.||No||Subwoofer pairing skill||Plugging in the right output source is a must.||Plugging in the right input source is a must.|
* Only the subwoofer issue will be resolved. ** Only the subwoofer issue will be resolved. *** Only the input source issue will be resolved.
😉Method 1: Reset Your Vizio Soundbar
Several common issues can be resolved by resetting the soundbar. It does, however, remove every detail in the soundbar, including Bluetooth pairings. As a result, you will need to factory reset it.
Follow these steps to reset your soundbar:
The factory reset is complete when the LED lights on the soundbar display flash three times.
Using the Bluetooth and volume down buttons, reset the device.
You may also use your Bluetooth and the volume buttons to reset the soundbar. To do so correctly, take the following steps:
To indicate that the factory reset is complete, the LED lights on the soundbar display will flash three times.
Here's the Vizio Sound Manual PDF For User Model SB36512-F6.
♻️ Method 2: Reset the Environmental Settings
When the eco audio setting is turned on or off, the soundbar will power off automatically if no audio cable signal is detected. So, if you don’t want it to turn off, you can turn it off.
To access the eco power button options, use your remote to hit the next or previous. Then, disable the eco settings.
🔥Method 3: Download and Install a Firmware Update
As long as the Vizio’s Soundbar is connected to the Internet via the Smart Cast mobile app, any new updates are instantly downloaded.
So, first, download the app on your mobile device and then follow these instructions to connect the soundbar to single/dual-band Wi-Fi.
When you’ve finished connecting the app’s network to the soundbar, follow these steps to update the firmware Vizio.
🤭Method 4: Change The Remote
It might also be possible that you’re using a universal remote or another device that isn’t a real soundbar remote? If this is the case, the soundbar will shut down automatically.
While the universal remote may function well, not all its functionalities may be. As a result, Vizio always suggests using an original remote. As a result, to resolve these issues, make sure you use a genuine remote of the soundbar.
🤝 Method 5: Replace the VIZIO subwoofer with your VIZIO Soundbar
Here’s the secret:
A VIZIO subwoofer replacement is the most popular fix among individuals who are experiencing VIZIO subwoofer and soundbar connection problems.
A different subwoofer and soundbar combination is excellent for enjoying the deep bass tones we all know and love for that authentic surround sound, home theater experience.
You can switch from your non-functioning VIZIO system to another subwoofer and listen to uninterrupted music.
⚡Method 6: Plugging into Right Audio Out Port Behind The TV
A TV has numerous distinct sorts of ports, the most of which are inputs (they deliver video and audio ‘In’ to the TV).
You’ll have to plug the soundbar with an output (which sends audio ‘Out’ of the TV). It will be clearly labeled as ‘Audio Out.’
🧿Method 7: Double-check that the Sound Bar is set to the correct input.
Follow these simple steps:
Also Read: 3 Ways To Connect Vizio Soundbar To Roku TV
😶Why Does My Vizio Soundbar Continue To Turn Off Even After I Reset It?
If you tried any or all of the procedures indicated above, your soundbar should stop turning off automatically. If it does not react, you will need to contact Vizio support service for assistance.
They may help you understand why the problem occurs, because they are the creators. If necessary, they may suggest a hardware repair. If necessary, you may need to explain the nature of the issue you are experiencing in detail; they will fix it.
You can prevent your soundbar from turning off automatically by resetting it. You must also confirm that the firmware is up-to-date. Connecting it to the Internet using the Vizio Smart Cast app on your phone instantly downloads the updates.
🤓FAQs About The VIZIO Sound Bar
Do Vizio soundbars require an update?
Ans: The truth is that your Vizio Soundbar may require updates in the future. They release firmware and software updates regularly, and these updates assist in improving your soundbar’s performance and compatibility and may resolve current issues.
If you do not receive these updates, your soundbar may cease to function abruptly.
How do I keep my Vizio Soundbar up-to-date?
Ans: When a new firmware version is ready, your Vizio’s Soundbar will download it for you automatically. However, your device must be linked to the Internet via the Vizio Smart Cast mobile app.
The Vizio Smart Cast Mobile App updates the Vizio Sound Bar.
To update the firmware to the most recent version, follow the procedures below:
• Navigate to “Settings > System > Check for Updates” in the Vizio Smart Cast mobile app.
• Click “Yes” to confirm that you want to check for updates.
• When an update is available, the soundbar will be turned off. It will automatically download and install the new firmware.
• The update procedure can take up to 30 minutes to complete. Keep in mind that while the update is being deployed, the connection between the Smart Cast app and the soundbar will be lost.
• When finished, the power LED will remain illuminated, and the Smart Cast app connection will be restored.
During the upgrade process, do not manually turn on your soundbar. If the update is interrupted, you must restart the procedure from the beginning.
What’s the Deal with My Vizio Sound Bar Popping?
Ans: Popping noises on your Vizio TV might be annoying in the middle of a movie. Still, they could also be the first indicator of a problem that has to be addressed by a registered Vizio repair shop. The popping noises could be caused by your power outlet button supply, speakers, or INPUT Button.
How do I link my Vizio soundbar to the Internet?
Ans: To connect your Vizio bar to Wi-Fi, follow these steps:
• Use the Vizio Smart Cast Mobile App to connect your Vizio’s Sound Bar to the Wi-Fi router.
• From the iOS App Store or the Google Play Store, download the Vizio Smart Cast mobile app for your phone or tablet.
• Next, activate Wi-Fi Setup Mode on your soundbar by pressing the Menu button on the Sound Bar Remote. Locate the Wi-Fi Setup option by using the arrow keys.
• Next, press the play/pause button to select Wi-Fi Setup.
• Confirm your selection by pressing the Play/Pause button again.
• When in pairing mode, the front LEDs of the soundbar will begin to cycle as an indication.
• On the Vizio Smart Cast app’s home screen, scroll down and tap “Devices Settings.”
• Select “Add New Device” and follow the on-screen setup instructions.
Your soundbar is now Internet-connected.
How Can I Reset My Vizio Sound Bar?
Ans: Hold down the “Inputs” and “Bluetooth” buttons for 5 to 6 seconds. The restart of your Vizio soundbar will take place. If that doesn’t work, move on to the next step.
Hold down the “Inputs” and “Volume Down” keys for another 5 to 6 seconds. Your Vizio’s Soundbar should reboot now. If it doesn’t restart, proceed to the next step.
For 5 to 6 seconds, press and hold the “Inputs” and “Volume Up” buttons. If the first two procedures did not work for your soundbar, try this one.
What are the Vizio sound bar codes?
Ans: The codes for the Vizio’s Sound Bar 5 Digit Remote Control are 31517324543197511144. Some soundbars can be programmed to receive additional IR signals to be controlled.
Incorporate the TV volume IR into the SB. All codes were claimed to be compatible with the Soundbar VSB200, SB3820, VSB201, VHT215, and S3821.
If you’ve been frustrated and wondering, “Why does my VIZIO Sound Bar Keeps Turning Off on its own?” I’m sure this piece has been beneficial to you.
Do leave a comment if it is helpful to you!
Hi! I am a tech enthusiast who loves to write reviews on earphones, headphones, bluetooth speakers, and various other audio devices. I provide the best deals to my readers to help them win their Life called the #NewNormal.